| |
About Us
Capabilities
Case Studies
Proficiency Testing
Publications
News
Careers
Training
ENB |
Introduction
| Bibliography of HSL's
Publications | Methods for the Determination of Hazardous
Substances
Committee on Analytical Requirements
(CAR) | The Diffusive
Monitor
Publications - Safety Engineering
 Obtaining Copies:
Copies of published papers can be obtained through your public,
academic or company library service. If you do not have access to
such services please contact the British Library Document Supply
Centre, tel. 01937 546000 or use British Library online at http://www.bl.uk.
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
Publications 2004
HEYES, P.F.
(2004) Structural integrity - working together and getting it right. 7th International Conference on Engineering Structural Integrity
Assessment, 20-21 October 2004, Manchester, UK.
HEYES, P.F.
(2004) Experience from Health & Safety Laboratory investigations, Pressure Systems Casebook, PEP, London, 19-44.
SEDDON, C.M., MOODIE, K., THYER, A.M., MOATAMEDI, M
(2004) Preliminary analysis of fuel tank impact. International Journal
of Crashworthiness, 9, (3), 237-248.
Publications 2003
McCANN, P., SMITH, D.
(2003) Evaluation of instruments for the non-destructive testing
(NDT) of wire ropes. Published in Experiences with Ropes, Case
studies - good and bad experiences with ropes described and explained,
OIPEEC technical meeting 2003.
Back to the top
Publications 2002
SHUTER, D. M.
(2002) Dynamic fracture toughness determination using precracked
charpy specimens. From Charpy to Present Impact Testing.
Eds. D Francois & A Pineau. ESIS Publication 30. Elsevier Science
Ltd. Poitiers. ISBN 0 08 043970 5.237.
Back to the top
Publications 2001
CHAMBERS, C., HOLCOMBE, M., BARNARD, J.
(2001) Introducing X-machine models to verify PLC ladder diagrams. Computers in Industry. 45, 277-290.
HOBBS, J., BURGUETE, R., HEYES, P., PATTERSON, E.A.
( 2001) A photoelastic analysis of crescent-shaped cracks in bolts. Journal of Strain Analysis for Engineering Design, 36(1):
93-99.
SHUTER, D. M., DUTTON, J.T., GEARY, W.
(2001) The influence of dynamic testing on the J-R resistance curve
behaviour of medium density polyethylene. Advances in Fracture
Research - Proceedings of 10th International Conference on Fracture
(ICF 10), Honolulu. 2001. ISBN 0080440428.
SHUTER, D. M., DUTTON, J.T., GEARY, W.
(2001) Static and dynamic fracture properties of high strength steel
chain materials. Advances in Fracture Research - Proceedings
of 10th International Conference on Fracture (ICF 10), Honolulu.
2001. ISBN 0080440428.
SHUTER, D. M., GEARY, W., HEYES, P.F.
(2001) Engineering Performance of Mining Rockbolts. 29th International
Conference of Safety in Mines Research Institutes, 8-11 October
2001, Szczyrk, Poland.
Back to the top
Publications 2000
BUCHANAN, .D.J.
(2000) Mining health and safety research - Quo Vadis? International
Mining & Minerals Nov 2000, 3 (35), 295-299.
GEARY, W., DUTTON, J., SHUTER, D.M.
(2000) The influence of size effects and dynamic loading on the
fracture toughness of commercial GRP materials. Composites Science
and Technology 2000, 60, 633-638.
HOBBS, J.W., BURGUETE, R.L., HEYES, P., PATTERSON, E.A.
(2000) The effect of eccentric loading on the fatigue performance
of high tensile bolts. International Journal of Fatigue 2000, 22, 531-538.
WORSELL, N., WILDAY, J., TREBLE, T.
(2000) Proposed risk assessment methodology for designing safe machinery. Foresight and Precaution Conference Proceedings, The Safety and
Reliability Society and Society for Risk Analysis (Europe), Edinburgh May 2000, 2, 1441-1448.
Back to the top
Publications 1999
CHAMBERS, C., CROLL, P.R., BOWELL, M.
(1999) A study of incidents involving programmable electronic safety-related
systems. Interacting with Computers. 11, 597-609.
CORDEN, C.H.H.
(1999) Development of resin cappings for wire ropes in mines - Part
2: Service trials on friction-wider ropes. Transactions of the
Institution of Mining and Metallurgy 1999, 108, A37-51.
WILSON, C., WILLIAMS, M.
(1999) Accidental release of detaching hooks by debris impact. 28th International Conference of Safety in Mines Research Institutes,
Sinaia, Romania. 7-11 June 1999, 359-373.
WRAY, A. M.
(1999) Preparing for a safe year 2000. Loss Prevention Bulletin 1999, 145, 6-8.
Back to the top
Publications 1998
GEARY, W., DUTTON, J. T.
(1998) The prediction of fracture toughness properties from 3 mm diameter
punch discs. Small Specimen Test Techniques. ASTM STP 1329,
eds. Corwin, W.R., Rosinski, S.T., van Walle, E.
HEYES, P. F.
(1998) Industrial failures and life assessment - HSL experience. Institution of Mechanical Engineers. Remnant Life Prediction. Seminar
Publication 1998, 4, 9-15.
SHUTER, D. M., GEARY, W.
(1998) Fatigue crack growth from semi-elliptical surface cracks. Proceedings International Conference on Lifetime Management and
Evaluation of Plant, Structures and Components, Churchill College,
Cambridge, 22-24 September 1998. 381.
Back to the top
Publications 1997
None listed at present - page under construction.
Back to the top
Publications 1996
HOLLIS, E. J.
(1996) An experimental facility for the measurement of wind forces
on a clad scaffold structure with integral roof, enclosing a roofless
building. Proceedings of the 3rd UK Conference on Wind Engineering.
Exeter College, Oxford. 16-18 September 1996, eds. P Freathy,
P F Consultants, 201-202.
NICHOLSON, C.E., HEYES, P.F.
(1996) Case studies in lifting equipment. Proceedings of Fifth
International Conference, Structural Failure, Product Liability
and Technical Insurance 1996, 289-300.
SHAW, J. M., HEENAN, K., WATERHOUSE, D.
(1996) Derailment criteria for uncaptivated rack locomotives. Mining
Technology. 78, (896), 111-112.
SHAW, J. M., HEENAN, K., WHITE, G. P., WATERHOUSE, D.
(1996) Stability of 0-6-0 mining locomotives. Mining Technology. 78, (895), 85-88.
SHUTER, D. M., GEARY, W.
(1996) Some aspects of fatigue crack growth retardation behaviour
following tensile overloads in a structural steel. Fatigue and
Fracture of Engineering Materials and Structures, 19,
(2/3), 185-199.
SHUTER, D. M., GEARY, W., DUTTON, J.
(1996) The derivation of materials properties data from small scale
punch tests. Proceedings of European Conference on Fracture 11:
Mechanisms and Mechanics of Damage and Fracture, Poitiers, EMAS.
2205.
TREVETT, A. S.
(1996) Risky receptacles? The Chemical Engineer. 620,
27-30.
WILSON, C., PERRY, P. CRICHTON, O.
(1996) Dynamic loading on engineering materials and components. Proceedings of the 11th European Conference on Fracture of the European
Structural Integrity Society (Volume 3). Poitiers, France. 3-6
September 1996. eds. J Petit, Engineering Materials Advisory Services
Ltd., 1996, 2241-2246. ISBN 094781793X.
Back to the top
Publications 1995
NICHOLSON, C. E., ROEBUCK, B.
(1995) The Investigation of the Hillsborough disaster by Health
and Safety Executive. Safety Science. 18, 249-259.
SHAW, J. M., HEENAN, K., WATERHOUSE, D.
(1995) Braking performance of mining locomotives. Mining Technology. 77, (891), 333-338.
SHAW, J. M., HEENAN, K., WHITE, G. P., WATERHOUSE, D.
(1995) Track reactive brake pads for mining locomotives. Mining
Technology. 77, (892), 361-363.
SHUTER, D. M., GEARY, W.
(1995) Fatigue crack growth from two-dimensional surface defects. Fatigue and Fracture of Engineering Materials and Structures. 18, (6), 653-659.
SHUTER, D. M., GEARY, W.
(1995) Fatigue crack growth from semi-elliptical surface defects. Materials Ageing and Component Life Extension. 1,
205.
Back to the top
|
